SD CDL VEHICLE INSPECTION TEST
11.
If your vehicle has power steering, during your pre-trip external inspection you must check that:
|
there's a function light.
|
|
|
the engine rpm is down close to
idle.
|
|
|
there are no power steering fluid leaks or damage to the power steering hoses.
|
|
|
there are 2 lit red lights indicating it's there.
|
12.
During the vehicle inspection test, you may be asked to:
|
remove a spare electrical fuse.
|
|
|
replace the electrical and brake lines.
|
|
|
change the coolant.
|
|
|
check the engine oil level.
|
13.
During the driving test, the examiner will be scoring you on:
|
how fast you drive.
|
|
|
how many times you turn.
|
|
|
your general attitude.
|
|
|
general driving behavior.
|
14.
When inspecting your vehicle for suspension system defects, look for:
|
cracked or broken spring hangers.
|
|
|
missing or broken leaves in any leaf spring.
|
|
|
leaking shock absorbers.
|
|
|
All of the above.
|
15.
During the vehicle inspection test, as you approach the vehicle you should (among other things):
|
look under the vehicle for fuel leaks.
|
|
|
check to see if the vehicle is leaning to one side.
|
|
|
check the area around the vehicle for low hanging wires.
|
|
|
All of the above.
|
16.
Vehicle inspections should be done routinely _______ operating the vehicle.
|
while
|
|
|
after
|
|
|
by
|
|
|
before
|
17.
Pre-trip inspections of doubles and triples should:
|
take less time than inspecting straight trucks.
|
|
|
be done by the shipper.
|
|
|
take more time than inspecting straight trucks.
|
|
|
be done once a week.
|
18.
When looking at the gauges during a pre-trip vehicle inspection:
|
oil pressuse should come up to normal within seconds after the engine is started.
|
|
|
you should pump the brake pedal three times to test the parking brake.
|
|
|
you should immediately turn on the stop lights.
|
|
|
None of the above.
|
19.
When checking the condition of the visible parts during your pre-trip inspection, make sure that the _________ are secured against rubbing, snagging or wearing.
|
tailboards
|
|
|
air lines and electrical wiring
|
|
|
side boards and stakes
|
|
|
reflectors
|
20.
When checking the condition of wheels and rims during the pre-trip inspection, make sure that:
|
no more than two lug nuts are missing.
|
|
|
no studs, spacers, clamps, or lugs are missing, bent, or broken.
|
|
|
the end of the kingpin is even with the top of the fifth wheel.
|
|
|
All of the above.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More