UT CDL HAZMAT TEST - PRACTICE TEST
View instructions
Any driver, regardless of the vehicle Class, who wants to haul hazardous materials, must add an “H” endorsement to their CDL. In order to obtain the Hazmat endorsement drivers are required to pass a Transportation Security Administration background check and a knowledge test. The Utah hazmat test consists of 30 questions. To pass, you must correctly answer at least 24 questions (80%). The UT CDL hazmat test covers the information found in the Utah CDL Manual. Study the chapter covering hazardous materials to learn how to recognize, handle, and transport Hazmat, then take this practice test to prepare for your exam!
Not Sure You Will Pass?
Get a Pass Guarantee
Get a Pass Guarantee
UPGRADE TO CDL PREMIUM
1.
Shipping papers must include:
the price of the hazardous materials.
|
|
what the materials will be used for.
|
|
an emergency response telephone number.
|
|
All of the above.
|
2.
Placards are:
signs that warn others to stay at least 500 feet away from the vehicle.
|
|
used to warn others when the Gross Vehicle Weight (GVW) exceeds 10,000 pounds.
|
|
signs put on the inside of a vehicle that remind the driver of the type of cargo he or she is carrying.
|
|
signs put on the outside of a vehicle that identify the hazard class of the cargo.
|
3.
The regulations require that HazMat employees be trained and tested at least once every:
5 years.
|
|
3 years.
|
|
year.
|
|
10 years.
|
4.
The two main places on which the hazardous materials identification number must appear are:
the gas tank and the right side of the truck.
|
|
the shipping paper and the package
|
|
the license plate and the package.
|
|
the shipping paper and the driver's ID.
|
5.
To avoid rollbacks when you start, you should:
release the parking brake only when you have applied enough engine power.
|
|
if you have manual transmission, partly engage the clutch before you take your right foot off the brake.
|
|
put on the parking brake whenever necessary.
|
|
All of the above.
|
6.
If there is an "RQ" before or after the HEMS description on the shipping paper, it means that:
the material has a value of more $50,000.00.
|
|
the material is in a package containing no other materials.
|
|
the carrier must report any spill of this material.
|
|
All of the above.
|
7.
Before transporting sealed loads, you should check that:
the load is properly secured.
|
|
the seal numbers match the placard numbers.
|
|
the load can be inspected.
|
|
All of the above.
|
8.
The only acceptable way to check tire pressure is to:
check the minimum tread depth.
|
|
use a tire pressure gauge.
|
|
push on the tire to feel the pressure.
|
|
None of the above.
|
9.
If you are being tailgated, you should:
move to the left lane.
|
|
increase your following distance.
|
|
speed up.
|
|
flash your brake lights.
|
10.
During an en route inspection, you discover an overheated tire. You must:
wait at least one hour before continuing your trip.
|
|
remove the tire and place it a safe distance from your vehicle.
|
|
lower the tires air pressure by at least 15 psi.
|
|
cool the tire and wait at least two hours before continuing your trip.
|
Page 1 of 3
Next page
Grade this page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More
CDL Hazmat Test UT
Number of questions: | 30 |
Correct answers to pass: | 24 |
Passing score: | 80% |
Save Time. Learn Faster.
Ace Your CDL Test.
Ace Your CDL Test.
UPGRADE TO CDL PREMIUM
Rate this CDL Hazmat Test
4.5 out of 5
based on 310 votes
based on 310 votes