CDL VEHICLE INSPECTION TEST VERMONT
11.
Doing a vehicle inspection is very important. Why?
|
A defect found during an inspection could save you problems later.
|
|
|
Federal and state regulations require that drivers inspect their vehicle.
|
|
|
All of the above.
|
12.
During the driving test, when asked to make a lane change you should:
|
make the lane change before using proper signals.
|
|
|
make the necessary traffic checks first and use proper signals before changing lanes.
|
|
|
make the change immediately without looking.
|
13.
Name some key suspension system parts.
|
Main spring, axle and font axle hanger
|
|
|
Pitman arm, hydraulic fluid reservoir and tie rod
|
|
|
Drag link, spindle and gear box
|
14.
During the pre-trip inspection, belts should:
|
not be inspected.
|
|
|
be checked for tightness and excessive wear.
|
|
|
checked for oil pressure.
|
15.
Check that the ____ belt is securely mounted, and adjusts, latches properly.
|
air compressor
|
|
|
safety
|
|
|
engine
|
16.
You are checking the tractor-trailer connection to make sure it is safe and secure. The landing gear should be:
|
raised slightly off the ground.
|
|
|
fully lowered.
|
|
|
fully raised.
|
17.
Exhaust system parts should be:
|
loose.
|
|
|
rubbing against fuel system parts.
|
|
|
None of the above.
|
18.
You pump the brake pedal three times, then hold it down for five seconds, making sure that the pedal does not move. You are checking:
|
the air brakes.
|
|
|
the service brake.
|
|
|
the hydraulic brakes.
|
19.
If loose or missing, _______ may cause movement between the frame and fifth wheel assembly.
|
locking pins
|
|
|
mounting bolts
|
|
|
electric connectors
|
20.
During the basic control skills test, what is the maximum number of times you may look to check the position of your vehicle in the the straight-line backing exercise?
|
3
|
|
|
1
|
|
|
2
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More