VEHICLE INSPECTION CDL TEST COLORADO
11.
All CDL vehicle inspection tests include:
|
an engine start and an inspection of the entire vehicle.
|
|
|
an engine inspection and tire check.
|
|
|
an in-cab inspection and background check.
|
|
|
an engine start and in-cab inspection.
|
12.
If loose or missing, _______ may cause movement between the frame and fifth wheel assembly.
|
electric connectors
|
|
|
locking pins
|
|
|
safety chains
|
|
|
mounting bolts
|
13.
During a pre-trip inspection, when checking the power steering hoses, you should:
|
check for leaks.
|
|
|
check that the brake chambers are not leaking.
|
|
|
look for broken or distorted coil springs.
|
|
|
check for damaged or bent rims.
|
14.
Which of the following is NOT a key part of the steering system?
|
Drag link
|
|
|
Steering shaft
|
|
|
Tie rod
|
|
|
Axle
|
15.
A vehicle inspection should be done:
|
by a helper whenever possible.
|
|
|
differently each time, so you are less likely to forget something.
|
|
|
once every month.
|
|
|
the same way each time so you are less likely to forget something.
|
16.
What should you do to test your hydraulic brakes for leaks?
|
Pump the brake pedal three times, then apply pressure to the pedal and hold for five seconds.
|
|
|
Hold the brake pedal down for five seconds, then pump it three times.
|
|
|
Pump the brake pedal three times, then apply pressure for 9 seconds.
|
|
|
Pump the brake pedal five times, then apply pressure for three seconds.
|
17.
During the vehicle inspection test, you will be asked to:
|
change the coolant.
|
|
|
change a tire.
|
|
|
move your vehicle forward, backward.
|
|
|
explain to the examiner what you would inspect and why.
|
18.
When taking the road test, if asked to make a turn you should:
|
check traffic in all directions.
|
|
|
only use the turn signal if other vehicles are present.
|
|
|
gradually increase your speed.
|
|
|
All of the above.
|
19.
When checking the condition of the steering system, you must:
|
Check the windshield wiper arms.
|
|
|
Test what happens under braking conditions.
|
|
|
Visually inspect the steering mechanism.
|
|
|
grab the steering mechanism to test for looseness.
|
20.
During the vehicle inspection test, as you approach the vehicle you should (among other things):
|
check to see if the vehicle is leaning to one side.
|
|
|
look under the vehicle for fuel leaks.
|
|
|
check the area around the vehicle for low hanging wires.
|
|
|
All of the above.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More