CDL VEHICLE INSPECTION TEST CONNECTICUT
11.
When approaching a vehicle as part of a pre-trip inspection, which of the following could be a sign of trouble?
|
Fresh oil under the vehicle
|
|
|
Parking brake is on
|
|
|
Inflated tires
|
|
|
All of the above
|
12.
During the pre-trip inspection, check that the ________ supply air or hydraulic fluid to the brakes.
|
brake linings
|
|
|
brake chambers
|
|
|
slack adjusters
|
|
|
brake hoses or lines
|
13.
The most important reason for doing a vehicle inspection is:
|
Property damage requirements
|
|
|
Safety
|
|
|
Liability insurance
|
|
|
Employer liability
|
14.
Which of the following must be inspected on every tire?
|
Battery.
|
|
|
Steering box.
|
|
|
Brake chambers.
|
|
|
Hub oil/grease seals and axle seals.
|
15.
You are checking the tractor-trailer connection to make sure it is safe and secure. The landing gear should be:
|
raised slightly off the ground.
|
|
|
fully lowered.
|
|
|
fully raised.
|
|
|
None of the above.
|
16.
Pre-trip inspections of doubles and triples should:
|
be done once a week.
|
|
|
be done by the shipper.
|
|
|
take less time than inspecting straight trucks.
|
|
|
take more time than inspecting straight trucks.
|
17.
When conducting the vehicle inspection test:
|
the air ride suspension should not be checked for leaks.
|
|
|
applicants will not have to see that the brake chambers are not leaking.
|
|
|
you may be asked to check that the steering box is not leaking.
|
|
|
you may have to check that the minimum tread depth is 2/32 on steering axle tires.
|
18.
When checking the steering system during your pre-trip inspection you should look for:
|
mismatched lock rings.
|
|
|
steering wheel play of more than 10 degrees.
|
|
|
cracked drums.
|
|
|
shoes or pads with oil or grease on them.
|
19.
Name some things you should check on the FRONT of your vehicle during your pre-trip inspection.
|
Low beams, high beams, four-way flashers, and turn signals
|
|
|
U-Bolts, anchor plate and bellows
|
|
|
Oil, transmission, air compressor, and radiator
|
|
|
None of the above.
|
20.
During the driving test, when approaching a railroad crossing, you should _________ while your vehicle is in the crossing.
|
not change gears
|
|
|
pass slow moving vehicles
|
|
|
change lanes
|
|
|
None of the above.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More