KY CDL VEHICLE INSPECTION TEST

11. Which of the following is not part of the air brake system?
Air storage tanks
Air filter
Alcohol evaporator
Air compressor
12. During the vehicle inspection test, as you approach the vehicle you should (among other things):
check to see if the vehicle is leaning to one side.
look under the vehicle for fuel leaks.
check the area around the vehicle for low hanging wires.
All of the above.
13. You should check that the _____ is solid, clear of objects, and securely bolted to the tractor frame.
sliding pintle
kingpin
apron
catwalk
14. What is a pull up when referring to truck driving?
A specific maneuver used to decelerate smoothly in the exit lane.
When a driver stops and pulls forward to get a better position.
Using the speedometer to know when to shift up.
A driving maneuver used to pull your vehicle over to the side of the road and stop.
15. Checking the automatic transmission fluid level may require:
the vehicle to be parked downhill.
you to pump the brake.
the engine to be running.
the 4-way emergency flashers to be activated.
16. Which gauge show that the alternator and/or generator is charging?
Engine oil temperature
Ammeter/voltmeter
Oil pressure
All of the above
17. In a vehicle inspection, all lug nuts should:
be free of cracks.
show no signs of looseness.
be free of distortions.
All of the above.
18. During the pre-trip inspection, check that the ________  supply air or hydraulic fluid to the brakes.
brake hoses or lines
brake linings
slack adjusters
brake chambers
19. Rust around wheel nuts may mean:
the weather is wet.
the nuts are too tight.
the nuts are loose.
the wheels or rims have had welding repairs.
20. If you are checking that the air hoses and electrical lines are not spliced, cut, chafed or worn, you are inspecting:
the locking jaws.
the mounting bolts.
the air / electric lines.
the exhaust system.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More