MI CDL VEHICLE INSPECTION TEST

11. _______ are one of the most common problems found in roadside inspections.
Slack adjusters
Out-of-adjustment brakes
Brake drums
12. Broken suspension parts can be very dangerous. When inspecting your vehicle for suspension system defects, look for:
Spring hangers that allow movement of axle from proper position.
Broken leaves in a multi-leaf spring.
All of the above.
13. When conducting a vehicle inspection test, while the engine is off you may be asked to identify any of the following parts of the engine compartment, except:
the water pump.
the Anti-lock Braking System indicator.
the alternator.
14. The "Start Engine and Inspect inside of the Cab" step of the 7-step inspection method involves each of the following, EXCEPT:
checking the air pressure gauge.
check the condition of the controls.
checking engine oil level.
15. During the vehicle inspection test, CDL applicants may be asked to:
replace the emergency flashers.
change a tire.
None of the above.
16. When checking tires, which of the following is acceptable?
Radial and bias-ply tires used together.
Dual tires that do not come in contact with each other
Retreaded tires on the front wheels of a bus
17. If the coolant container is not part of the pressurized system:
you should remove the container cap and wait until the system has cooled.
you can safely remove the cap and add coolant even when the engine is hot.
you should never remove the radiator cap or any part of the pressurized system until the system has cooled.
18. Which of the following is NOT a key part of the steering system?
Gear box
Pitman arm
Leaf spring
19. __________ are devices designed to absorb and damp jolts and vibrations.
Brakes
Springs
Shock absorbers
20. If loose or missing, _______ may cause movement between the frame and fifth wheel assembly.
mounting bolts
electric connectors
locking pins
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More