CDL VEHICLE INSPECTION TEST MINNESOTA
11.
What should be clean with no obstructions, illegal stickers, or damages to the glass?
|
The lighting indicators.
|
|
|
The headlights.
|
|
|
The windshield.
|
|
|
None of the above.
|
12.
During the vehicle inspection, make sure that the _____ is in the engaged position and that the safety latch is in place.
|
drawbar
|
|
|
apron
|
|
|
locking jaw
|
|
|
release arm
|
13.
When inspecting brakes, you should look for:
|
cracked drums.
|
|
|
pads with oil, grease, or brake fluid on them.
|
|
|
shoes worn dangerously thin.
|
|
|
All of the above.
|
14.
When starting your vehicle, oil pressure should come up to normal:
|
in about a minute.
|
|
|
in about two minutes.
|
|
|
within 5 minutes of driving.
|
|
|
within seconds.
|
15.
After a trip:
|
you should inspect the vehicle.
|
|
|
you should get the oil changed.
|
|
|
you should place the vehicle out of service.
|
|
|
you should replace the battery.
|
16.
When taking the road test, you will be expected to make regular traffic checks. You should do all of the following except:
|
checking for traffic regularly.
|
|
|
checking mirrors regularly.
|
|
|
checking engine oil level.
|
|
|
check your mirrors for traffic after an intersection.
|
17.
If the coolant container is not part of the pressurized system:
|
you can safely remove the cap and add coolant even when the engine is hot.
|
|
|
you should remove the container cap and wait until the system has cooled.
|
|
|
you should never remove the radiator cap or any part of the pressurized system until the system has cooled.
|
|
|
None of the above.
|
18.
During the vehicle inspection test, you will be asked to:
|
explain to the examiner what you would inspect and why.
|
|
|
change a tire.
|
|
|
move your vehicle forward, backward.
|
|
|
change the coolant.
|
19.
Without engine oil:
|
the ABS won't work.
|
|
|
the engine can be destroyed rapidly.
|
|
|
traction will be reduced.
|
|
|
exhaust emissions will be reduced.
|
20.
A battery/box check is important. Wherever located, see that battery(ies) are secure, connections are tight, and cell caps are present. Also, make sure that:
|
battery connections do not show signs of excessive corrosion, and battery box and cover or door is not damaged and is secure.
|
|
|
the battery box and cover or door is open.
|
|
|
battery connections show signs of corrosion.
|
|
|
None of the above.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More