VEHICLE INSPECTION CDL TEST NEVADA
View instructions
To obtain a CDL, you will be required to pass a vehicle inspection test. The vehicle inspection test, formerly known as pre-trip, is a skills test to see if you identify which features and equipment on the test vehicle should be inspected before driving. During the test, you will be asked to do an inspection of your vehicle. You will be expected to show your knowledge of the inspection process and you will be tested to see if you know whether your vehicle is safe to drive. During the CDL inspection test, DMV does not allow the use of testing aids, other than the vehicle inspection guide in the Nevada CDL Manual. To prepare for the test, study the following sections of the CDL manual: Driving Safely and the Vehicle Inspection Test. If you do not pass the CDL inspection test, the other skills tests will be postponed.
Not Sure You Will Pass?
Get a Pass Guarantee
Get a Pass Guarantee
UPGRADE TO CDL PREMIUM
1.
If your vehicle has power steering, during your pre-trip external inspection you must check that:
the engine rpm is down close to
idle.
|
|
there's a function light.
|
|
there are 2 lit red lights indicating it's there.
|
|
there are no power steering fluid leaks or damage to the power steering hoses.
|
2.
Rust trails around the lug nuts on the tires indicate that:
the lugs may be loose.
|
|
the tire hasn't been removed in some time.
|
|
the rim is defective.
|
|
All of the above.
|
3.
Which of the following engages and disengages the engine from the drive train?
The drive shaft
|
|
The foot brake
|
|
The clutch
|
|
The front axle
|
4.
During the pre-trip inspection, check that the ________ supply air or hydraulic fluid to the brakes.
brake linings
|
|
brake hoses or lines
|
|
brake chambers
|
|
slack adjusters
|
5.
During the vehicle inspection, you should check your clutch for:
Damage
|
|
Sticking
|
|
Looseness
|
|
All of the above.
|
6.
Vehicle inspections should be done routinely _______ operating the vehicle.
before
|
|
after
|
|
by
|
|
while
|
7.
In the steering box part of the vehicle inspection test, you should:
check that the steering box is securely mounted.
|
|
look for any missing nuts or bolts.
|
|
check that the steering box is not leaking.
|
|
All of the above.
|
8.
Name some things you should check on the FRONT of your vehicle during your pre-trip inspection.
Low beams, high beams, four-way flashers, and turn signals
|
|
U-Bolts, anchor plate and bellows
|
|
Oil, transmission, air compressor, and radiator
|
|
None of the above.
|
9.
Which of the following is a key component of the steering system?
Gear box
|
|
Anchor plate
|
|
Spring Shackle
|
|
Leaf spring
|
10.
__________ are devices designed to absorb and damp jolts and vibrations.
Shock absorbers
|
|
Valves
|
|
Springs
|
|
Brakes
|
Page 1 of 2
Next page
Grade this page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More
Inspection Test - NV CDL
Number of questions: | 20 |
Correct answers to pass: | 16 |
Passing score: | 80% |
Save Time. Learn Faster.
Ace Your CDL Test.
Ace Your CDL Test.
UPGRADE TO CDL PREMIUM
Rate this Inspection Test -CDL
4.9 out of 5
based on 391 votes
based on 391 votes