NJ CDL VEHICLE INSPECTION TEST
11.
Which of the following are key steering system parts?
|
Torque rod, leaf spring, spring shackle
|
|
|
U-Bolts, anchor plate and bellows
|
|
|
Tie rod, drag link, and gear box
|
|
|
Main spring, axle and font axle hanger
|
12.
During the vehicle inspection test, after starting the engine the coolant temperature should:
|
rise slowly.
|
|
|
rise quickly.
|
|
|
decrease quickly.
|
|
|
decrease gradually.
|
13.
During the basic control skills test you may be asked to perform any of the following, except:
|
Trailer jackknife
|
|
|
Offset back/right
|
|
|
Parallel park
|
|
|
Straight line backing
|
14.
During the pre-trip inspection, belts should:
|
checked for oil pressure.
|
|
|
checked for leaks.
|
|
|
not be inspected.
|
|
|
be checked for tightness and excessive wear.
|
15.
If loose or missing, _______ may cause movement between the frame and fifth wheel assembly.
|
safety chains
|
|
|
electric connectors
|
|
|
mounting bolts
|
|
|
locking pins
|
16.
To check the signal lights, do the following:
|
Turn off all the lights, turn on the right turn signal lights, and turn on the stop lights.
|
|
|
Turn on the stop lights, turn on all the lights, and turn on the right turn signal lights.
|
|
|
Turn on all the lights, turn off the stop lights, and turn off the left turn signal lights.
|
|
|
Turn off all the lights, turn on the stop lights, and turn on the left turn signal lights.
|
17.
The most important reason for doing a vehicle inspection is:
|
Safety
|
|
|
Property damage requirements
|
|
|
Liability insurance
|
|
|
Employer liability
|
18.
Rust around wheel nuts may mean:
|
the weather is wet.
|
|
|
the nuts are loose.
|
|
|
the nuts are too tight.
|
|
|
the wheels or rims have had welding repairs.
|
19.
How can you check slack adjusters?
|
Wait for normal air pressure, release the parking brake, move the vehicle forward, and apply the brakes firmly using the brake pedal.
|
|
|
Use gloves and pull hard on each slack adjuster that you can reach.
|
|
|
Turn the electrical power on and step on and off the brake pedal.
|
|
|
Check that the spring brakes come on automatically.
|
20.
You are checking the dipstick to see that the oil level is within the safe operating range. The level must be:
|
below the refill mark.
|
|
|
below the power steering fluid level.
|
|
|
above the refill mark.
|
|
|
above the coolant level.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More