CDL VEHICLE INSPECTION TEST NORTH CAROLINA

11. During the pre-trip vehicle inspection test, when examining hoses with the examiner, look for:
the temperature gauge.
puddles on the ground.
spare electrical fuses.
frays in the water pump belt.
12. When checking tires as part of the pre-trip inspection, you should check for all of the following except:
tread separation.
cracked valve stems.
minimum tread depth.
that all tires come from the same manufacturer.
13. Wheel bearing seals should be checked for:
leaks.
dirt.
tears.
twisted axles.
14. When taking the road test, you will be evaluated on your gear usage. You should do all of the following except:
shift in turns and intersections.
not grind the gears.
select a gear that does not lug the engine.
select a gear that does not rev the engine.
15. After a trip:
you should get the oil changed.
you should replace the battery.
you should place the vehicle out of service.
you should inspect the vehicle.
16. During the pre-trip inspection, when starting the engine you should:
press the brake pedal.
listen for unusual noises.
fasten your safety belt.
check the coolant level in the radiator.
17. During the skills test, when driving on the expressway, you should:
change lanes frequently.
drive 10 mph or more above the posted limit.
drive slowly in the left lane of traffic.
use mirrors to check traffic.
18. Name some things you should check on the FRONT of your vehicle during your pre-trip inspection.
Low beams, high beams, four-way flashers, and turn signals
U-Bolts, anchor plate and bellows
Oil, transmission, air compressor, and radiator
None of the above.
19. What maintains air pressure in the air brake system?
Power steering fluid
Alternator belt
Air compressor
Water pump
20. _______ are one of the most common problems found in roadside inspections.
Brake drums
Slack adjusters
Out-of-adjustment brakes
Air hoses connected to the brake chambers
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More