VEHICLE INSPECTION CDL TEST NORTH CAROLINA

11. Suspension system defects include:
rust around wheel nuts.
steering wheel play of more than 10 degrees.
cracked or broken spring hangers.
All of the above.
12. How can you tell if your vehicle is equipped with ABS?
Trailers will have yellow ABS malfunction lamps on the left side.
Look for yellow ABS malfunction lamps on the instrument panel.
Look under the vehicle for the wheel speed sensor wires coming from the back of the brakes.
All of the above.
13. When performing the stop/start maneuver during the skills test, you should:
decelerate smoothly.
activate your left turn signal.
apply the brakes as hard as you can without locking the wheels.
not use your turn signals.
14. How can you check slack adjusters?
Check that the spring brakes come on automatically.
Use gloves and pull hard on each slack adjuster that you can reach.
Turn the electrical power on and step on and off the brake pedal.
Wait for normal air pressure, release the parking brake, move the vehicle forward, and apply the brakes firmly using the brake pedal.
15. What is a pull up when referring to truck driving?
A driving maneuver used to pull your vehicle over to the side of the road and stop.
A specific maneuver used to decelerate smoothly in the exit lane.
When a driver stops and pulls forward to get a better position.
Using the speedometer to know when to shift up.
16. Which of the following is not a braking system on a truck?
Emergency brake
Parking brake
Steering brake
Service brake
17. During the vehicle inspection, when approaching the vehicle you should:
check that the vehicle is parked properly.
look under the vehicle for fresh oil, fuel leaks or coolant.
check that the vehicle is clear.
check that the parking brakes are not set.
18. Which of the following is true about the skills test?
You must take the skills tests in the type of vehicle for which you wish to be licensed.
You don't have to take the skills tests in the type of vehicle for which you wish to be licensed.
You must take the skills tests in a vehicle that has components marked or labeled.
It doesn't matter what vehicle you use to take these tests.
19. Exhaust system parts should be:
leaking.
loose.
rubbing against fuel system parts.
None of the above.
20. During the vehicle inspection test, as you approach the vehicle you should (among other things):
check the area around the vehicle for low hanging wires.
check to see if the vehicle is leaning to one side.
look under the vehicle for fuel leaks.
All of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More