NC CDL VEHICLE INSPECTION TEST

11. During the vehicle inspection test, when asked to check the power steering fluid you should:
check for adequate power steering fluid level.
ensure that the power steering fluid level is above the refill mark.
indicate where power steering fluid dipstick is located.
All of the above.
12. If loose or missing, _______ may cause movement between the frame and fifth wheel assembly.
electric connectors
locking pins
safety chains
mounting bolts
13. ______ must have a minimum tread depth of 4/32 of an inch.
All tires other than front tires
Steering axle tires
Spare tires
All of the above.
14. During the vehicle inspection test, you may be asked to:
check the engine oil level.
remove a spare electrical fuse.
change the coolant.
replace the electrical and brake lines.
15. When performing the stop/start maneuver during the skills test, once stopped you should do all of the following, except:
Cancel your turn signal.
Activate your right turn signal.
Activate your 4-way emergency flashers.
Apply the parking brake.
16. As part of the external inspection, check that all _______ are present, free of cracks and distortions, and show no signs of looseness.
axle seals
lug nuts
spacers
brake linings
17. Exhaust system parts should NOT:
rub against fuel system parts.
rub against tires.
be loose.
All of the above.
18. Which of the following are key steering system parts?
Leaf spring, torque rod, front axle hanger
Axle, main spring, spring shackle
Tie rod, drag link, spindle
Lug nuts, rims, tire
19. To check the automatic transmission fluid:
you should turn the engine off.
you must go down grades.
the wheel nuts must be loose.
the engine may have to be running.
20. During your inspection, you should look into the fifth-wheel gap and check that the _________ are fully closed around the kingpin.
locking jaws
couplings (U-joints)
lug nuts
mounting bolts
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More