Save Time and Get a Pass Guarantee! LIMITED-TIME OFFER: Get CDL PREMIUM Now and SAVE $64! Upgrade To Premium


View instructions
To obtain a CDL, you will be required to pass a vehicle inspection test. The vehicle inspection test, formerly known as pre-trip, is a skills test to see if you identify which features and equipment on the test vehicle should be inspected before driving. During the test, you will be asked to do an inspection of your vehicle. You will be expected to show your knowledge of the inspection process and you will be tested to see if you know whether your vehicle is safe to drive. During the CDL inspection test, DMV does not allow the use of testing aids, other than the vehicle inspection guide in the Oklahoma CDL Manual. To prepare for the test, study the following sections of the CDL manual: Driving Safely and the Vehicle Inspection Test. If you do not pass the CDL inspection test, the other skills tests will be postponed.
1. You should check that the _____ is solid, clear of objects, and securely bolted to the tractor frame.
sliding pintle
2. When looking at the gauges during a pre-trip vehicle inspection:
you should pump the brake pedal three times to test the parking brake.
oil pressuse should come up to normal within seconds after the engine is started.
you should immediately turn on the stop lights.
3. Exhaust system parts should NOT:
rub against fuel system parts.
rub against tires.
All of the above.
4. When taking the road test, you must do all of the following except:
Tell the examiner where you'd like to drive
Obey all traffic signs
Wear your safety belt
5. When checking the condition of wheels and rims during the pre-trip inspection, make sure that:
the end of the kingpin is even with the top of the fifth wheel.
no studs, spacers, clamps, or lugs are missing, bent, or broken.
no more than two lug nuts are missing.
6. When taking the road test, after driving under an overpass, you may be asked:
what the weight limit was.
how wide the overpass was.
what the posted clearance or height was.
7. Wheel and rim problems include:
missing clamps.
mismatched lock rings.
All of the above.
8. If you find anything unsafe during the pre-trip inspection, you are required to:
get it fixed before driving.
drive cautiously until it is fixed.
write it in your inspection report.
9. What maintains air pressure in the air brake system?
Air compressor
Power steering fluid
Alternator belt
10. When making a lane change during the skills test, you should:
come to a complete stop first.
make the necessary traffic checks first.
avoid using your mirrors.
Page 1 of 2
Next page  
Rate This Free Test
4.9 out of 5
based on 296 votes

Inspection Test - OK CDL

Number of questions: 20
Correct answers to pass:16
Passing score:80%
Number of questions: 20
Correct answers to pass:16
Passing score:80%
Share This Online CDL Test