OK CDL VEHICLE INSPECTION TEST

View instructions
To obtain a CDL, you will be required to pass a vehicle inspection test. The vehicle inspection test, formerly known as pre-trip, is a skills test to see if you identify which features and equipment on the test vehicle should be inspected before driving. During the test, you will be asked to do an inspection of your vehicle. You will be expected to show your knowledge of the inspection process and you will be tested to see if you know whether your vehicle is safe to drive. During the CDL inspection test, DMV does not allow the use of testing aids, other than the vehicle inspection guide in the Oklahoma CDL Manual. To prepare for the test, study the following sections of the CDL manual: Driving Safely and the Vehicle Inspection Test. If you do not pass the CDL inspection test, the other skills tests will be postponed.
1. When you inspect the front of your vehicle as part of the walk around inspection, you check all of the following EXCEPT:
the air pressure gauge.
the condition of the steering system.
the condition of your front axle.
2. During the vehicle inspection, when asked to check the oil level you should:
indicate where the dipstick is located.
make sure the engine is off.
All of the above.
3. When taking the road test, you will be expected to make regular traffic checks. You should do all of the following except:
checking for traffic regularly.
checking engine oil level.
checking mirrors regularly.
4. During the pre-trip vehicle inspection test, when examining hoses with the examiner, look for:
frays in the water pump belt.
puddles on the ground.
the temperature gauge.
5. When checking tires as part of the pre-trip inspection, you should check for all of the following except:
minimum tread depth.
that all tires come from the same manufacturer.
tread separation.
6. Rust around wheel nuts may mean:
the nuts are too tight.
the nuts are loose.
the wheels or rims have had welding repairs.
7. Exhaust system parts should be:
rubbing against fuel system parts.
loose.
None of the above.
8. When taking the road test, you will be evaluated on your lane usage. You should NOT:
complete a turn in the proper lane on a multiple lane road.
drive the vehicle over curbs.
stop behind crosswalks.
9. When checking tires, which of the following is not a problem?
4/32 inch tread depth on front tires
Cracked valve stems
Too much air pressure
10. Which of the following is NOT true? During the vehicle inspection test, when starting the engine you should show that:
the oil pressure gauge is working.
the oil pressure gauge comes on when braking.
the temperature gauge is working.
 
Page 1 of 2
Next page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More

OK Vehicle Inspection Test

Number of questions: 20
Correct answers to pass:16
Passing score:80%
Share This Online CDL Test
Rate this Vehicle Inspection Test
4.9 out of 5
based on 288 votes