VEHICLE INSPECTION CDL TEST OREGON

11. When performing the stop/start maneuver during the skills test, once stopped you should do all of the following, except:
Activate your 4-way emergency flashers.
Activate your right turn signal.
Apply the parking brake.
Cancel your turn signal.
12. If you find anything unsafe during the pre-trip inspection, you are required to:
write it in your inspection report.
drive cautiously until it is fixed.
get it fixed before driving.
inform your motor carrier after the trip.
13. If your vehicle has power steering, during your pre-trip external inspection you must check that:
there's a function light.
there are 2 lit red lights indicating it's there.
the engine rpm is down close to idle.
there are no power steering fluid leaks or damage to the power steering hoses.
14. When conducting the vehicle inspection test:
you may have to check that the minimum tread depth is 2/32 on steering axle tires.
the air ride suspension should not be checked for leaks.
applicants will not have to see that the brake chambers are not leaking.
you may be asked to check that the steering box is not leaking.
15. Which of the following is a suspension system defect?
Leaking brake fluid
Leaking power steering cylinder
Loose exhaust pipes
Leaking shock absorbers
16. Key suspension system parts include:
Bearing plates
Lock rings
Tie rod
All of the above.
17. As part of the external inspection, check that all _______ are present, free of cracks and distortions, and show no signs of looseness.
lug nuts
axle seals
spacers
brake linings
18. When checking the engine compartment in a vehicle inspection, you should check all of the following except:
Shock absorbers
Engine oil level
Windshield washer fluid level
Coolant level in radiator
19. Which of the following is true about the skills test?
It doesn't matter what vehicle you use to take these tests.
You don't have to take the skills tests in the type of vehicle for which you wish to be licensed.
You must take the skills tests in the type of vehicle for which you wish to be licensed.
You must take the skills tests in a vehicle that has components marked or labeled.
20. During the pre-trip inspection, belts should:
checked for leaks.
not be inspected.
be checked for tightness and excessive wear.
checked for oil pressure.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More