SCHOOL BUS PRACTICE TEST UTAH

11. When stopping at drawbridges that do not have a signal light or traffic control attendant, you must stop at least _____ before the draw of the bridge.
100 feet
50 feet
150 feet
25 feet
12. When approaching a school bus stop, you should:
continuously check all mirrors.
activate amber warning lights.
approach cautiously.
All of the above.
13. You must have at least _____ inch tread depth in every major groove on front tires.
6/32
4/32
3/32
2/32
14. When backing, you should:
use the mirrors on both sides.
back and turn toward the right side whenever possible.
only use mirror on the driver's side.
back quickly.
15. ______are mounted on the front corners of the bus.
Outside left and right side cross view mirrors
Outside left and right side rearview mirrors
Warning devices
Emergency doors
16. The stop signal arm and flashing red signals of a school bus must be used only:
in heavy traffic.
in heavy rain.
during sharp turns.
when the school bus is stopped on a street or highway to load or unload students.
17. Depending on the length and width of a school bus, the blind spot behind the bus could extend up to:
100 feet
200 feet
150 feet
400 feet
18. When unloading at the school, the driver should:
secure the bus by starting the engine.
ask one of the students to supervise unloading.
make sure the students are returning to the bus.
walk through the bus and check for hiding/sleeping students.
19. Properly adjusted outside left and right side flat mirrors should allow the driver to see:
the front bumper.
at least 1 traffic lane on either side of the bus.
the front tires touching the ground.
the rear tires touching the ground.
20. If driving a charter bus, you should:
explain the passenger comfort and safety rules while driving.
not allow passengers on the bus until departure time.
allow passengers on the bus early.
tell passengers to fill the back of the bus first.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More