CDL VEHICLE INSPECTION TEST WEST VIRGINIA
11.
Suspension system defects may include all of the following except:
|
Missing or broken leaf springs
|
|
|
Cracked spring hangers
|
|
|
Distorted coil springs
|
|
|
Cracked hoses
|
12.
When checking the condition of the visible parts during your pre-trip inspection, make sure that the _________ are secured against rubbing, snagging or wearing.
|
tailboards
|
|
|
reflectors
|
|
|
side boards and stakes
|
|
|
air lines and electrical wiring
|
13.
Which of the following is NOT a tire problem to look for during the vehicle inspection?
|
Radial and bias-ply tires used together
|
|
|
All the tires are made by the same manufacturer
|
|
|
Recapped tires on the front of a school bus
|
|
|
Cracked valve stems
|
14.
During the vehicle inspection, when approaching the vehicle you should:
|
look under the vehicle for fresh oil, fuel leaks or coolant.
|
|
|
check that the vehicle is parked properly.
|
|
|
check that the vehicle is clear.
|
|
|
check that the parking brakes are not set.
|
15.
During a pre-trip inspection, when checking the power steering hoses, you should:
|
look for broken or distorted coil springs.
|
|
|
check that the brake chambers are not leaking.
|
|
|
check for damaged or bent rims.
|
|
|
check for leaks.
|
16.
_______ are one of the most common problems found in roadside inspections.
|
Brake drums
|
|
|
Out-of-adjustment brakes
|
|
|
Slack adjusters
|
|
|
Air hoses connected to the brake chambers
|
17.
Broken suspension parts can be very dangerous. When inspecting your vehicle for suspension system defects, look for:
|
Broken leaves in a multi-leaf spring.
|
|
|
Damaged air suspension systems.
|
|
|
Spring hangers that allow movement of axle from proper position.
|
|
|
All of the above.
|
18.
When checking your tires during a pre-trip inspection, which of the following is acceptable?
|
Tires made by different manufacturers
|
|
|
Dual tires that come in contact with parts of the vehicle
|
|
|
Mismatched sizes
|
|
|
Cracks in the tires
|
19.
When checking tires, which of the following is acceptable?
|
Dual tires that do not come in contact with each other
|
|
|
Retreaded tires on the front wheels of a bus
|
|
|
Radial and bias-ply tires used together.
|
|
|
Dual tires that come in contact with each other
|
20.
When conducting the vehicle inspection test:
|
the air ride suspension should not be checked for leaks.
|
|
|
you may be asked to check that the steering box is not leaking.
|
|
|
applicants will not have to see that the brake chambers are not leaking.
|
|
|
you may have to check that the minimum tread depth is 2/32 on steering axle tires.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More