CDL VEHICLE INSPECTION TEST ARIZONA

11. During the pre-trip inspection, check that the ________  supply air or hydraulic fluid to the brakes.
slack adjusters
brake hoses or lines
brake linings
12. During the vehicle inspection test, as you approach the vehicle you should (among other things):
check the area around the vehicle for low hanging wires.
look under the vehicle for fuel leaks.
All of the above.
13. During the vehicle inspection, when approaching the vehicle you should:
check that the vehicle is clear.
check that the parking brakes are not set.
look under the vehicle for fresh oil, fuel leaks or coolant.
14. During the vehicle inspection, when asked to check the oil level you should:
indicate where the dipstick is located.
make sure the engine is off.
All of the above.
15. A vehicle inspection should be done:
differently each time, so you are less likely to forget something.
the same way each time so you are less likely to forget something.
once every month.
16. What is a pull up when referring to truck driving?
A specific maneuver used to decelerate smoothly in the exit lane.
A driving maneuver used to pull your vehicle over to the side of the road and stop.
When a driver stops and pulls forward to get a better position.
17. What should be clean with no obstructions, illegal stickers, or damages to the glass?
The headlights.
The windshield.
The lighting indicators.
18. When conducting the vehicle inspection test:
the air ride suspension should not be checked for leaks.
you may be asked to check that the steering box is not leaking.
applicants will not have to see that the brake chambers are not leaking.
19. During the pre-trip vehicle inspection test, when examining hoses with the examiner, look for:
puddles on the ground.
frays in the water pump belt.
the temperature gauge.
20. Key suspension system parts include:
Tie rod
Bearing plates
All of the above.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More