HI CDL VEHICLE INSPECTION TEST

11. During the external inspection, you should check that the _______ (if equipped) are evenly centered, with the dual wheels and tires evenly separated, and are not bent, damaged, or rusted through.
spacers
axle seals
All of the above.
12. When taking the road test, you will be expected to make regular traffic checks. You should do all of the following except:
checking for traffic regularly.
checking engine oil level.
checking mirrors regularly.
13. Vehicle inspections:
are important because vehicle defects found during an inspection could save you problems later.
should not be done by the shipper.
should only be done when a vehicle defect is found.
14. Which of the following is NOT part of a standard vehicle inspection?
Bad brake drums or shoes.
Seating defects.
Tire problems.
15. When checking the lights before driving:
you should check them from inside the vehicle.
make sure the parking brake is not set.
you should turn off the engine.
16. Which of the following must be inspected on every tire?
Battery.
Brake chambers.
Hub oil/grease seals and axle seals.
17. During a walk around inspection, which of the following should you check?
Condition of the front axle.
Shock absorber condition.
All of the above.
18. How can you tell if your vehicle is equipped with ABS?
Trailers will have yellow ABS malfunction lamps on the left side.
Look for yellow ABS malfunction lamps on the instrument panel.
All of the above.
19. When you inspect the front of your vehicle as part of the walk around inspection, you check all of the following EXCEPT:
the condition of the steering system.
the air pressure gauge.
the condition of your front axle.
20. During the pre-trip inspection test, you will be expected to:
show that you can identify the bus operating systems, and that you know how to inspect them for safety.
watch the examiner inspect the bus for safety.
pass three basic control tests.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More