View instructions
To earn your motorcycle license in Utah, you must pass a knowledge test and on-cycle skill test. Knowledge test questions are based on the information from the Utah Motorcycle Manual. They require that you know and understand driving laws, road rules and safe riding practices, as well as information specific to two-wheeled vehicles. The written motorcycle test consists of 25 questions, and you'll need at least 20 correct answers to pass.
1. Motorcycle riders can improve their riding strategy by using the "SIPDE" process. SIPDE stands for:
Scan, identify, predict, decide, execute
See, identify, predict, decide, examine
Scan, identify, proceed, direct, execute
See, identify, process, detect, execute
2. Before riding a motorcycle, it's important to check:
oil and fluids.
tires and wheels.
All of the above.
3. ______ is prohibited when you ride downhill.
Coasting in neutral
Shifting gears
Increasing your speed
Slowing down
4. ________ through a turn to stabilize suspension.
Roll on the throttle
Decrease your speed
Apply the rear brake
Pull in the clutch
5. The coolant and brake hydraulic fluid levels should be checked:
when carrying passengers.
once every three months.
6. When riding in a group, motoryclists should ride in a single-file formation:
in school zones.
on highways.
at all times.
when entering a highway.
7. Eye protection:
is only needed when riding in bad weather.
is only needed if your motorcycle is not equipped with a windshield.
None of the other answers is correct.
should give a clear view to either side.
8. If you approach a blind intersection:
make sure you are not being followed.
you should make a U-turn as soon as possible.
pull away from the curb without checking for traffic behind.
move to the portion of the lane that will bring you into another driver’s field of vision as soon as possible.
9. Other drivers are most likely to try and share the lane with a motorcycle when:
traffic is heavy.
the motorcycle rider is preparing to turn at an intersection.
they want to pass the motorcycle.
All of the above.
10. When you check your tires, what are you checking for?
Tread wear
Tire pressure
Cuts and scrapes
All of the above.
Page 1 of 3
Next page

UT Motorcycle Test Facts

Number of questions: 25
Correct answers to pass:20
Passing score:80%
Share This Online Motorcycle Test
Rate this Motorcycle Practice Test
4.5 out of 5
based on 149 votes