UTAH CDL PASSENGER PRACTICE TEST
View instructions
The passenger endorsement applies to drivers who want to drive a bus in any Class A, B, or C CDL. Applicants must pass a special knowledge test, and must pass skills tests in a passenger vehicle. The Utah CDL passenger test consists of 20 questions. To pass, you must correctly answer at least 16 questions (80%). The UT passenger test covers the following sections of the Utah CDL Manual: Driving Safely, Transporting Passengers, Vehicle Inspection Test, Basic Control Skills Test and Road Test. Take this UT practice test now to prepare for the actual passenger test!
Not Sure You Will Pass?
Get a Pass Guarantee
Get a Pass Guarantee
UPGRADE TO CDL PREMIUM
1.
When loading or unloading passengers, put the transmission:
in first gear.
|
|
in Neutral.
|
|
second gear.
|
|
in reverse.
|
2.
What factors can cause brakes to fail or fade?
Brakes out of adjustment
|
|
Not relying on the engine braking effect
|
|
Excessive use of the service brakes
|
|
All of the above.
|
3.
If a bus has a restroom:
the restroom must have an emergency exit.
|
|
the restroom emergency buzzer must be in safe working condition.
|
|
the restroom must have a window.
|
|
All of the above.
|
4.
If you recognize a distracted driver on the road, you should:
try to pass them.
|
|
flash your brake lights at them.
|
|
follow them closely.
|
|
give them plenty of room.
|
5.
When a rider wants to board the bus with a car battery, you should:
check that the battery does not contain any gasoline.
|
|
put the car battery at the back of the bus.
|
|
put the car battery in the aisle.
|
|
not allow the car battery on the bus.
|
6.
When driving in extremely hot weather, if the air pressure in the tires is too high, you should:
call your supervisor.
|
|
continue driving.
|
|
stop and remain stopped until the tires cool off.
|
|
let air out of the tires to decrease pressure.
|
7.
Active railroad crossings:
have a traffic control device installed at the crossing to regulate traffic.
|
|
do not have any type of traffic control device at the crossing.
|
|
require drivers to recognize the crossing, search for any train and decide if there is sufficient space to cross safely.
|
|
All of the above.
|
8.
When checking your mirrors you should:
only use the passenger side mirror.
|
|
only use the driver side mirror.
|
|
not make regular checks.
|
|
use both mirrors.
|
9.
Before driving your bus, to be sure it's safe you should:
ask the Safety Certificate to your supervisor.
|
|
review the inspection report made by the previous driver.
|
|
review the bus safety guidelines.
|
|
ask the shipper for the Safety Confirmation report.
|
10.
If driving a charter bus, you should:
allow passengers on the bus early.
|
|
explain the passenger comfort and safety rules while driving.
|
|
not allow passengers on the bus until departure time.
|
|
tell passengers to fill the back of the bus first.
|
Page 1 of 2
Next page
Grade this page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More
UT Passenger Test
Number of questions: | 20 |
Correct answers to pass: | 16 |
Passing score: | 80% |
Save Time. Learn Faster.
Ace Your CDL Test.
Ace Your CDL Test.
UPGRADE TO CDL PREMIUM
Rate this Passenger Test
4.5 out of 5
based on 255 votes
based on 255 votes