UT CDL Passenger Test (2024) - FREE CDL Practice Test

1. To know when to shift, you can use each of the following except:

2. When approaching a vehicle for a pre-trip inspection, you should:

start the engine and listen for unusual noises.
make sure the parking brake is on.
look under the vehicle for hazards to vehicle movement.
look under the vehicle for fuel leaks, fresh oil, coolant or grease.

3. Warnings on low bridges or underpasses:

must be posted.
are often posted, but sometimes they are not.
are always posted.
None of the above.

4. When arriving at a destination, it is best to tell passengers to take their carry-ons with them:

after stopping.
before coming to a complete stop.
as they get off the bus.
at least twice.

5. The heavier the vehicle:

the less work the brakes must do to stop it.
the more work the brakes must do to stop it.
the higher the center of gravity will be.
None of the above.

6. Service brakes should:

only be checked by a mechanic.
be checked before each trip.
always be checked before applying the brakes.
All of the above.

7. Which of the following road surfaces freezes first?

8. At dawn, dusk, in rain or snow, to make yourself easier to see you should:

9. Baggage and freight should be secured in ways that:

Allow riders to exit by any door or window in an emergency.
Protect riders from injury if carry-ons shift or fall.
Allow the driver to move freely and easily.
All of the above

10. When approaching a vehicle with a distracted driver, you should:

change lanes quickly.
sound your horn.
quickly pass the vehicle.
maintain your safe following distance.

UT CDL PASSENGER PRACTICE TEST