VEHICLE INSPECTION CDL TEST WYOMING
11.
During the vehicle inspection test, you may be asked to:
|
change the coolant.
|
|
|
remove a spare electrical fuse.
|
|
|
replace the electrical and brake lines.
|
|
|
check the engine oil level.
|
12.
The "Start Engine and Inspect inside of the Cab" step of the 7-step inspection method involves each of the following, EXCEPT:
|
check the condition of the controls.
|
|
|
checking the air pressure gauge.
|
|
|
checking engine oil level.
|
|
|
starting the engine, then listening for unusual noises.
|
13.
During a pre-trip inspection, when checking the power steering hoses, you should:
|
check that the brake chambers are not leaking.
|
|
|
look for broken or distorted coil springs.
|
|
|
check for leaks.
|
|
|
check for damaged or bent rims.
|
14.
Key suspension system parts include:
|
Lock rings
|
|
|
Tie rod
|
|
|
Bearing plates
|
|
|
All of the above.
|
15.
When checking tires, which of the following is acceptable?
|
Dual tires that do not come in contact with each other
|
|
|
Radial and bias-ply tires used together.
|
|
|
Retreaded tires on the front wheels of a bus
|
|
|
Dual tires that come in contact with each other
|
16.
When performing the stop/start maneuver during the skills test, once stopped you should do all of the following, except:
|
Activate your 4-way emergency flashers.
|
|
|
Apply the parking brake.
|
|
|
Activate your right turn signal.
|
|
|
Cancel your turn signal.
|
17.
During the skills test, if you must stop before making the turn, you should:
|
come to a complete stop after the line to get a better view.
|
|
|
make sure the turn signal is off.
|
|
|
keep the front wheel aimed straight ahead.
|
|
|
let your vehicle roll.
|
18.
When you inspect the front of your vehicle as part of the walk around inspection, you check all of the following EXCEPT:
|
the condition of your front axle.
|
|
|
the air pressure gauge.
|
|
|
the condition of the windshield.
|
|
|
the condition of the steering system.
|
19.
When checking tires, which of the following is not a problem?
|
Cracked valve stems
|
|
|
Too much air pressure
|
|
|
Radial and bias-ply tires used together
|
|
|
4/32 inch tread depth on front tires
|
20.
When checking the condition of the visible parts during your pre-trip inspection, make sure that the _________ are secured against rubbing, snagging or wearing.
|
reflectors
|
|
|
tailboards
|
|
|
air lines and electrical wiring
|
|
|
side boards and stakes
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More