WY CDL VEHICLE INSPECTION TEST
11.
When checking the condition of the steering system, you must:
|
grab the steering mechanism to test for looseness.
|
|
|
Test what happens under braking conditions.
|
|
|
Check the windshield wiper arms.
|
|
|
Visually inspect the steering mechanism.
|
12.
When checking the engine compartment:
|
you should put the gearshift in neutral.
|
|
|
the engine should be running.
|
|
|
wheels should not be chocked.
|
|
|
the parking brake should be on.
|
13.
During the pre-trip inspection, belts should:
|
checked for leaks.
|
|
|
be checked for tightness and excessive wear.
|
|
|
checked for oil pressure.
|
|
|
not be inspected.
|
14.
When looking at the gauges during a pre-trip vehicle inspection:
|
you should pump the brake pedal three times to test the parking brake.
|
|
|
you should immediately turn on the stop lights.
|
|
|
oil pressuse should come up to normal within seconds after the engine is started.
|
|
|
None of the above.
|
15.
What should you do to test your hydraulic brakes for leaks?
|
Pump the brake pedal five times, then apply pressure for three seconds.
|
|
|
Pump the brake pedal three times, then apply pressure for 9 seconds.
|
|
|
Hold the brake pedal down for five seconds, then pump it three times.
|
|
|
Pump the brake pedal three times, then apply pressure to the pedal and hold for five seconds.
|
16.
When checking the steering system during your pre-trip inspection you should look for:
|
steering wheel play of more than 10 degrees.
|
|
|
shoes or pads with oil or grease on them.
|
|
|
cracked drums.
|
|
|
mismatched lock rings.
|
17.
When starting your vehicle, oil pressure should come up to normal:
|
within seconds.
|
|
|
within 5 minutes of driving.
|
|
|
in about a minute.
|
|
|
in about two minutes.
|
18.
During the external inspection, check that all lug nuts:
|
show no signs of looseness.
|
|
|
are present.
|
|
|
are free of cracks.
|
|
|
All of the above.
|
19.
What should be fully engaged with no loose or missing pins in the slide mechanism of the sliding fifth-wheel?
|
Locking pins
|
|
|
Sliding pintle
|
|
|
Locking jaws
|
|
|
Hitch release lever
|
20.
When checking the lights before driving:
|
the engine must be running.
|
|
|
make sure the parking brake is not set.
|
|
|
you should check them from inside the vehicle.
|
|
|
you should turn off the engine.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More