CDL PASSENGER TEST UTAH

11. To ensure passenger safety during loading and unloading, bus drivers should:
allow passengers enough time to sit down or brace themselves before departing.
always ensure that passengers are safely on the bus before closing the door(s).
start and stop as smoothly as possible.
All of the above.
12. To avoid distractions while driving, you should:
try to engage in complex conversations with the other occupants.
adjust vehicle controls and mirrors prior to driving.
use your phone only when there is no traffic around you.
smoke, eat, and drink only when the road is straight.
13. When driving in a construction zone, if a construction worker is near the road, you should:
maintain a constant speed.
speed up.
come to a complete stop.
further reduce your speed.
14. Your vehicle has air brakes. To stop, you should:
push the brake pedal down.
release the accelerator, push in the clutch, and shift to Neutral at the same time.
pull the parking brake control knob out.
pump the brake pedal 3 times.
15. To avoid blinding others, you should dim your lights within _____  of an oncoming vehicle.
50
100
250
None of the above.
16. Roof hatches:
must always be closed when driving.
must be left open as a regular practice.
may be locked in a partly open position for fresh air.
None of the above.
17. Pre-trip inspections:
should always be done in the same order.
should not be done unless the vehicle has problems that could cause a breakdown.
should not be done when a vehicle inspection report is available.
are optional when the driver is familiar with the vehicle.
18. If your ABS fails:
the first step is to get the vehicle off the road and stop.
you will still have normal brake functions.
your tires might grab unexpectedly and you could lose control.
you will have no brake function, and could lose control.
19. If your brakes fail on a steep mountain downgrade, you should:
use an escape ramp if it is available.
go right if the shoulder is clear.
leave the road immediately.
change lanes after making sure there is enough room.
20. When trying to put out an electrical fire you should:
use a B or C extinguisher.
use an D extinguisher.
use an A extinguisher.
use water.
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More