Save Time and Get a Pass Guarantee! LIMITED-TIME OFFER: Get CDL PREMIUM Now and SAVE $65!Upgrade To Premium

VEHICLE INSPECTION CDL TEST UTAH

View instructions
To obtain a CDL, you will be required to pass a vehicle inspection test. The vehicle inspection test, formerly known as pre-trip, is a skills test to see if you identify which features and equipment on the test vehicle should be inspected before driving. During the test, you will be asked to do an inspection of your vehicle. You will be expected to show your knowledge of the inspection process and you will be tested to see if you know whether your vehicle is safe to drive. During the CDL inspection test, DMV does not allow the use of testing aids, other than the vehicle inspection guide in the Utah CDL Manual. To prepare for the test, study the following sections of the CDL manual: Driving Safely and the Vehicle Inspection Test. If you do not pass the CDL inspection test, the other skills tests will be postponed.
1. Suspension system defects may include all of the following except:
Cracked hoses
Cracked spring hangers
Missing or brokenĀ  leaf springs
Distorted coil springs
2. In a vehicle inspection, all lug nuts should:
be free of distortions.
be free of cracks.
show no signs of looseness.
All of the above.
3. During the driving test, the examiner will be scoring you on:
how many times you turn.
general driving behavior.
your general attitude.
how fast you drive.
4. When taking the road test, if asked to make a turn you should:
check for traffic in all directions.
slow down before making the turn.
use turn signals.
All of the above.
5. When approaching a vehicle as part of a pre-trip inspection, the driver should look under the vehicle for all of the following except:
Fresh oil
Coolant
Windshield wiper fluid
Grease
6. Which of the following are key steering system parts?
Leaf spring, torque rod, front axle hanger
Lug nuts, rims, tire
Axle, main spring, spring shackle
Tie rod, drag link, spindle
7. Which of the following are key steering system parts?
Torque rod, leaf spring, spring shackle
Main spring, axle and font axle hanger
U-Bolts, anchor plate and bellows
Tie rod, drag link, and gear box
8. During a pre-trip inspection, to check your lights you should:
check the yellow malfunction lamps on the instrument panel.
with the engine running, put the vehicle in a forward gear and turn on the headlights.
with the engine running, turn on the headlights and 4-way emergency flashers, and get out of the vehicle.
turn off the engine, turn on the headlights and 4-way emergency flashers, and get out of the vehicle.
9. When checking the lights before driving:
the engine must be running.
you should turn off the engine.
make sure the parking brake is not set.
you should check them from inside the vehicle.
10. During the vehicle inspection test, you may be asked to:
replace the electrical and brake lines.
change the coolant.
check the engine oil level.
remove a spare electrical fuse.
 
Page 1 of 2
Next page
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More

Inspection Test - UT CDL

Number of questions: 20
Correct answers to pass:16
Passing score:80%
Share This Online CDL Test
Rate this Inspection Test -CDL
4.9 out of 5
based on 116 votes