CDL VEHICLE INSPECTION TEST UTAH
11.
Checking your vehicle's suspension system includes checking:
|
the air suspension systems.
|
|
|
the mounting brackets.
|
|
|
the tires.
|
|
|
All of the above.
|
12.
Which of the following is NOT a key part of the steering system?
|
Drag link
|
|
|
Tie rod
|
|
|
Steering shaft
|
|
|
Axle
|
13.
During the basic control skills test you may be asked to perform any of the following, except:
|
Trailer jackknife
|
|
|
Parallel park
|
|
|
Straight line backing
|
|
|
Offset back/right
|
14.
During the pre-trip inspection, belts should:
|
checked for oil pressure.
|
|
|
be checked for tightness and excessive wear.
|
|
|
not be inspected.
|
|
|
checked for leaks.
|
15.
If you are looking for puddles on the ground and dripping fluids on the underside of the engine and transmission, you are checking for:
|
Oil level
|
|
|
Leaks
|
|
|
Coolant level
|
|
|
None of the above.
|
16.
What should you do to test your vehicle's low air pressure warning signal?
|
With the engine running, put the vehicle in a forward gear and attempt to drive forward.
|
|
|
Release the parking brake valve and the tractor protection valve and reduce the air pressure by stepping on and off the brake pedal.
|
|
|
With the key in the "on" or "battery charge" position, rapidly apply and release the foot brake.
|
|
|
Pump the brakes until the air pressure drops below 80 psi.
|
17.
Rust around wheel nuts may mean:
|
the nuts are too tight.
|
|
|
the weather is wet.
|
|
|
the nuts are loose.
|
|
|
the wheels or rims have had welding repairs.
|
18.
When conducting a vehicle inspection test, while the engine is off you may be asked to identify any of the following parts of the engine compartment, except:
|
the air compressor.
|
|
|
the Anti-lock Braking System indicator.
|
|
|
the water pump.
|
|
|
the alternator.
|
19.
A vehicle inspection should be done:
|
differently each time, so you are less likely to forget something.
|
|
|
by a helper whenever possible.
|
|
|
once every month.
|
|
|
the same way each time so you are less likely to forget something.
|
20.
During the vehicle inspection, when checking the tires you should:
|
ensure that valve caps are missing.
|
|
|
check for the minimum tread depth (4/32 on all tires).
|
|
|
ensure the middle of the tires is more worn than the outside.
|
|
|
ensure that the tread is evenly worn.
|
GRADE ME
NOT SURE YOU WILL PASS? GET CDL PREMIUM NOW! - Learn More